HONDA CB 200 PARTS FROM COMPOUND SOUND ON EBAY

1974 HONDA CB 200 BUNDLE

FRONT WHEEL  honda cb200 front wheel rim 44711-354-701 44701-354-701 44701-317-701 front wheel hub 44611-351-700 $100.00 SPOKE B (9X200.5) 97394-52241-10 SPOKE B (9X200) 97718-52240-10

REAR WHEEL  honda cb200 rear wheel rim 2(1.60X18) Daido 42701-235-003 rear wheel hub 42610-354-000 SPOKE B (9X163.5) 97395-52167-10 SPOKE B (9X162.5) 97660-52165-10

REAR BRAKE PANEL AND LEVER  honda cb200 rear brake panel 43110-354-000 rear brake cam 43141-235-000 rear brake arm 43411-354-000

FRONT WHEEL SPEEDO PARTS  honda cb200 gear box cover 44691-351-700 gear box retainer 44680-351-700 front wheel bearing retainer 44643-300-000 front wheel side collar 44321-351-700 6mm washer 90522-351-700

SPEEDO GEARBOX  honda cb200 speedometer gear box 3 44800-354-701

FRONT WHEEL BEARINGS Boss Bearings Performance Part #42G8

REAR SPROCKET AND SPROCKET PLATE AND PARTS  honda cb200 SPROCKET, FINAL DRIVEN (35T) 41201-343-010 PLATE, SPROCKET SIDE 41211-453-000 COLLAR, RR. WHEEL SIDE 42311-216-000 CIRCLIP (58MM) 90664-216-000

32 LBS

27 X 18 X 15


Parts taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles.

If you want to see more pictures, let us know. Because this is a bundle of parts, we have more detail shots that don’t fit into the ebay 12 photo limit per listing.

Wheel rims and spokes have some rust on them, and chrome has some rust damage. But the rims are solid, straight and relatively true, and all the spoke nipples turn, so rim can be adjusted.

Rear wheel needs bearings replaced. Front wheel comes with new bearings in box.

Speedometer gearbox is clean and spins well, needs new oil seal. Old one is included for reference.

Rear sprocket is 35 tooth. Sprocket teeth still in usable condition.

$195 PLUS SHIPPING.


1974 HONDA CB 200  BUNDLE

LOWER FRONT FORK TUBES  honda cb200 right front fork lower case 51431-453-000 left front fork lower case 51531-354-003

FRONT FORK SPRINGS  honda cb200 front fork spring 51410-453-010 set

UPPER FORK TUBE PLUGS

FRONT FORK REFLECTOR SET  honda cb200 front reflex reflector 33741-340-670 44.00 reflector base 33743-342-670

HANDLEBAR RISERS  honda cb200 lower handlebar holder 53132-316-670 20.00 upper handlebar holder 95014-22200 8x36 flange bolts 90111-362-000

FRONT FORK PISTON ASSEMBLIES  honda cb200 front fork pipe seat damper rod 51470-453-010 54.00 oil locking piece 51432-453-000 8mm socket bolt 90116-383-721

8 LBS 8 OZ

20 X 14 X 4    






Parts taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles.

If you want to see more pictures, let us know. Because this is a bundle of parts, we have more detail shots that don’t fit into the ebay 12 photo limit per listing.

Front fork lower cases have smooth interior bores. The top chrome rings have never been removed from the aluminum  fork cases, and are stuck on tight. Fork seals will certainly need replaced. All mounting points are solid and all screw threads are clean and good.

One of the front fork reflectors has a slight crack in it.


$95 PLUS SHIPPING


1974 HONDA CB 200 BUNDLE

CLUTCH BASKET AND PRIMARY GEAR  honda cb200 outer clutch 22100-354-000 20mm collar 22116-354-000 primary drive gear  13611-354-000 5

CLUTCH HUB  honda cb200 clutch center hub 2 22120-354-000 40.00 clutch pressure plate 22350-354-000 clutch plate B 22321-333-010 clutch spring washer 22402-354-005 special set ring 92mm 90609-333-000

CLUTCH PRESSURE PLATE

CLUTCH PLATES STEEL need pix

CLUTCH SPRINGS  need pix

6 LBS 2 OZ

11 X 11 X 8


Parts taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles.

Clutch springs measure 28.44 mm, 28.49 mm, 28.02 mm and 28.45 mm. Wear limit is 26.7 mm.


$85 PLUS SHIPPING


1974 HONDA CB 200 BUNDLE

honda cb200 points base 30361-354-000 points cover 30371-354-000 spark advancer assembly TOYO 30220-354-154 points base plate hitachi 30201-235-015 hitachi points 30202-216-005

honda cb200 right cylinder head side cover 12330-354-000 tachometer cover 12332-354-000 tach pinion gear 12421-338-000 22.00

2 LBS 5 OZ

8 X 7 X 5


Parts taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles.

If you want to see more pictures, let us know. Because this is a bundle of parts, we have more detail shots that don’t fit into the ebay 12 photo limit per listing.

Points will need good cleaning / filing / or replacing.

Spark timing advance operates smoothly and freely.

Some minor damage to points cover.

Some minor damage to tachometer cover.


$95 PLUS SHIPPING






1974 HONDA CB 200 BUNDLE

EXHAUST PIPE HEADERS  honda cb200 right exhaust header no muffler 18100-354-000 18100-354-620 18100-354-627 left exhaust header no muffler 18200-354-000 18200-354-620 18200-389-670

5 LBS 5 OZ

20 X 14 X 4

Parts taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles

These pipes do not include the mufflers. The metal at the very end of one of the pipes is deteriorating a bit. Will need some reinforcing.

Minor dings here and there along the surface of this pair of header pipes, but chrome is pretty good with a few rust issues.

Pipes have original factory shape, and are structurally solid, except for muffler end of one of the pipes. See photo enlargement of this area.


$65 PLUS SHIPPING

1974 HONDA CB 200 BUNDLE

LEFT AND RIGHT CARBURETORS, WITH LINKAGE, AND INTAKE MANIFOLDS / INSULATORS

honda cb200 left carburetor assembly 16102-354-004 float set 16013-046-004 16013-116-700 16013-116-704 float chamber 16015-304-004 carburetor insulator 16272-354-000 16272-389-670

honda cb200 right carburetor assembly 16100-354-004 choke rod set 16025-306-004 float set 16013-046-004 16013-116-700 16013-116-704 float chamber 16015-304-004 carburetor insulator 16272-354-000 16272-389-670

3 LBS 8 OZ

12 X 10 X 5


Parts taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles

Both carbs have original parts and need a good cleaning. There is scale and corrosion evident.

Slides work. Portions of old throttle cable attached to easily pull slides out. Float needle missing on one of these carbs, but you will want to rebuild them anyway, and new float needles often come with rebuild kits.

Throttle return springs slightly bent, but seem to have good strength, although you may want to replace them.

Float bowl drain screw also missing on one of these carbs.


$155 PLUS SHIPPING

1974 HONDA CB 200 BUNDLE

FRONT FORK BOOTS / GAITERS  honda cb200 front fork boot gaiter 51651-453-000

Pretty good condition. No rips or tears. Rubber is still soft and pliable. Set of 2.

12 OZ

9 X 6 X 5

Parts taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles.


$55 PLUS SHIPPING

1974 HONDA CB 200 BUNDLE

EXHAUST FLANGES AND COLLARS  honda cb200 exhaust pipe joint 18231-302-000 exhaust pipe joint collar 18233-306-010

2 LBS

10 X 7 X 4


Parts taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles.

Set of 2 flanges / joints and 4 collars. Straight and solid.

$45 PLUS SHIPPING


1974 HONDA CB 200 BUNDLE

TRANSMISSION MAINSHAFT / GEARS  honda cb200 13T transmission mainshaft 23211-354-300 108.00 17T second gear 23430-235-000 90.00 20T 30T shifting gear 23451-235-000 25T fifth gear 23481-235-000 40.00 15mm bearing bush 23931-354-000

TRANSMISSION DRIVESHAFT / COUNTERSHAFT / GEARS  honda cb200 tansmission countershaft driveshaft 23221-354-300 32T second gear 23441-235-000 49.00 29T third gear 23461-354-000 27T fourth gear 23471-354-000 24T fifth gear 23491-354-000 36T first gear 23420-235-010


6 LBS

10 X 8 X 5


Parts taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles.

All gears, dogs, shafts, splines and threads look good. Bearings may need to be renewed.

$95 PLUS SHIPPING


1974 HONDA CB 200 BUNDLE

CAMSHAFT / ROCKER ARMS / ROCKER SHAFTS  honda cb200 camshaft 14101-354-000 valve rocker arm 14431-216-010 rocker arm shaft 14451-354-000 tappet adjustment screw 90012-333-000


2 LBS 10 OZ

9 X 6 X 5


Parts taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles.

Camshaft specs as follows:

Exhaust lobes when new measure .9792 inches. This cam measures .975 and .975 inches. The wear limit is .9724 inches. So the exhaust lobes are well within spec.

Intake lobes when new measure .9865 inches. This cam measures .985 and .981 inches. The wear limit is .9803 inches. So the intake lobes are within spec, although one lobe is closer to wear limit than the other, perhaps due to extra wear from a sticking valve.

$155 PLUS SHIPPING

1974 HONDA CB 200 BUNDLE

LEFT ENGINE COVER / DRIVECHAIN COVER /  ALTERNATOR COVER

honda cb200 left crankcase cover 11340-354-000

honda cb200 drive chain cover 11661-354-000

honda cb200 alternator cover 11431-354-000


2 LBS 8 OZ

10 X 8 X 7


Parts taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles.

Some corrosion on the aluminum surfaces. Some small dings and nicks. Crankcase cover and drive chain cover are straight and solid, no cracks or breaks. Mating surfaces seem smooth enough for a good gasket seal to crankcase. Some wire brush marks visible, but probably able to be wet sanded / buffed out.

Alternator cover has some damage in form of a crease that has begun to be visible as a hairline crack on the inside. May be able to be sealed water tight with the correct repair.

$85 PLUS SHIPPING

1974 HONDA CB 200 BUNDLE

RIGHT ENGINE COVER WITH CLUTCH RELEASE MECHANISM  honda cb200 right crankcase cover 11330-354-010 183.00 dipstick 15650-354-000 12.00 clutch lever 22810-354-000 clutch cam plate A 22820-354-000 clutch lifter 22830-354-000 22.00 clutch lifter adjusting screw


5 LBS 10 OZ

15 X 10 X 8


Parts taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles.

Some corrosion on the aluminum surfaces. Some small dings and nicks. Crankcase cover is straight and solid, no cracks or breaks. Mating surfaces seem smooth enough for a good gasket seal to crankcase. Some wire brush marks visible, but probably able to be wet sanded / buffed out.

Clutch release mechanism appears to function as intended.


$135 PLUS SHIPPING

1974 HONDA CB 200 BUNDLE

VALVE ADJUSTMENT CAP SET  honda cb200 valve adjustment cap 12361-246-000 inspection cover


15 OZ

10 x 8 x 4


Parts taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles.

Some corrosion on the aluminum surfaces. Threads are good. O-ring seals may need replacing.


$45 PLUS SHIPPING


1974 HONDA CB 200 FRONT BRAKE DISK

honda cb200 front brake disk 45251-351-700 186.00 disc


5 LBS 4 OZ

16 x 13 x 4


Part taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles.

This disk measures 5.0 mm. So it is like new. The minimum thickness for these is 4.0 mm, so there is lots of life left in this brake disk. Brake surface is flat and smooth with no gouges or grooves. Minor surface wear marks from the brake pads. Some of the black paint in center has worn off.

A brand new disk like this one would set you back $186 on Partzilla.

$115 PLUS SHIPPING

1974 HONDA CB 200 OIL PUMP ASSEMBLY

honda cb200 oil pump 15210-354-010 pump filter screen 15334-354-010 oil pump plunger 15231-354-000 oil pump rod 15281-354-000 oil pump rod side washer 15292-354-000 assy

1 LB 4 OZ

8 X 5 X 4


Parts taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles.

Specs as follows: Piston (plunger) and bore both measure 14.95 mm. Plunger fits in bore smoothly. Pump is untested, but all parts appear clean and have potential to function as intended. Screen is clean with no tears or rips. Mounting bolts with good threads included.


$35 PLUS SHIPPING

1974 HONDA CB 200 DRIVE CHAIN CASE

honda cb200 drive chain case chain guard 40510-316-670B NH1


2 LBS 4 OZ

25 X 9 X 3


Part taken from 1974 Honda CB200, VIN CB200-1002971 with 17K miles.

Some of the original black paint has come off. Minor rust but basically clean and solid. Straight with no bends or dents. Mounting tab has good threads. Bolt included.

$25 PLUS SHIPPING

COMPOUND SOUND HOME PAGE

CompoundSoundLLC@gmail.com

All rights reserved. Copyright © 2019 Compound Sound LLC.